Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Air Duct Cleaning for West Seattle Homeowners
If your registers are pushing out visible dust, your home smells musty when the furnace kicks on, or allergies flare up every time the heat runs, the problem is usually sitting in the ductwork rather than the room. Our technicians have up to 8 years of experience and clean the full air pathway with professional-grade equipment, not a shop vac and a hose. We book air duct cleaning throughout West Seattle, and same-day appointments are often possible when you call early. Every job is quoted at one flat price per system, agreed before any work starts, with before-and-after photos of your own ducts when we’re done. The local pro is licensed and insured as their state requires. Call (877) 492-4032 for a free estimate.
West Seattle homes deal with a particular mix: older housing stock in neighborhoods like Gatewood and Genesee Hill, plenty of mature cedar and fir dropping pollen and fine debris through the warmer months, and a wet season that keeps windows shut for months at a stretch. That combination means return ducts pull in more than they should, and whatever settles there gets recirculated every time the system runs. Cleaning is how you break that cycle.
Key Takeaways
- One flat price per system, agreed before work starts, with no per-vent pricing.
- Rotobrush rotary brush extraction and Nikro HEPA-filtered vacuum on every job.
- Full air pathway coverage: supply and return ducts, HVAC unit, dryer vent, sealing and sanitizing.
- Before-and-after photos of your own ducts so you can see what was removed.
- Call (877) 492-4032. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Air Duct Cleaning Service Includes
Our menu covers the entire air pathway, so you don’t need a second contractor for the parts a clean-only company leaves behind. Here’s how each piece works.
Residential Duct Cleaning
Residential duct cleaning covers the ductwork serving a single-family home, from the supply registers through the return grilles back to the air handler. You need it when dust, pet hair or debris has built up over years of normal use, or when a remodel has pushed construction dust through the system. We run a Rotobrush rotary brush through each branch line to agitate what’s stuck to the duct walls, then pull it out with Nikro HEPA-filtered vacuum equipment so the particulate stays contained instead of landing back in your living room.

Commercial Duct Cleaning
Commercial duct cleaning handles larger systems in offices, retail spaces and light industrial buildings, where duct runs are longer and air volumes are higher. It matters when occupants notice stale air, when the system has gone years without attention, or when a buildout or tenant change calls for a clean baseline. We bring Abatement Technologies equipment for jobs with elevated contamination and set up containment so business can carry on in the rest of the space while we work.

Supply Duct Cleaning
Supply ducts are the branches that deliver conditioned air to your rooms, and they’re the ones you actually feel. They collect dust from the air handler side and, over time, restrict airflow enough that some rooms never quite heat or cool the way they should. We clean each supply run individually and check the register boots for gaps where a branch can leak into a wall cavity.

Return Duct Cleaning
Return ducts are the intake side, and they carry a heavier load because they pull air from the whole house, along with whatever’s suspended in it. A return that’s coated in dust feeds that dust straight back into the system, which is why a home can look clean and still cycle debris through every filter change. We clean the return trunk and grilles and inspect the joints, since returns are where we most often find a hidden leak pulling attic or crawlspace air.
Full System Cleaning
Full system cleaning combines supply, return, the air handler and the accessible components of the HVAC unit in a single visit, which is the approach we recommend for most homes. It’s what you want after buying a house with an unknown service history, or when a system has run for years without attention. Cleaning the whole path at once is the only way to know the air reaching your rooms hasn’t picked up contaminants somewhere between the intake and the vent.
Video Inspection
Video inspection sends a camera through the ductwork so you can see the actual condition of the interior before and after cleaning. It’s useful when you’ve been told a system needs replacement on the strength of a guess, or when you want documentation of what was found. We show you the footage and point out blockages, crushed sections or disconnected joints, and we tell you plainly which findings matter and which don’t.
If your dryer is taking two cycles to finish a load, that’s a separate pathway worth addressing at the same time. Our air duct cleaning West Seattle team also handles dryer vent work, and a full-system visit is the practical moment to schedule it.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Air Duct Cleaning
We work with Rotobrush rotary brush systems because they agitate duct walls without the limitations of a straight hose, and we pair them with Nikro HEPA-filtered vacuum equipment so what gets loosened also gets captured. We know where these systems lose suction, when a brush head needs swapping for a softer grade, and how to route the vacuum so a long return trunk still gets full pull at the far end. The same goes for Abatement Technologies equipment, which we bring out when a job calls for real containment and particulate control rather than a surface pass.
On the air quality side, we install Honeywell and Aprilaire systems and know how filtration and humidity control interact with duct cleanliness: a high-efficiency filter does more for a clean duct than a dirty one, and a media cabinet sized wrong for the system costs airflow. So whether you have Rotobrush-compatible rigid ductwork, a flex system, or something older and less standard, or you’re weighing a Honeywell or Aprilaire upgrade, we can help.
Signs You Need Air Duct Cleaning Right Now
Some of these are cosmetic. Others point to a real airflow or contamination problem. Here’s how to tell them apart.
- Dust settling on surfaces days after you clean. If a freshly wiped shelf is grey again within a few days, the system is redistributing particulate instead of capturing it. A filter change alone won’t fix that if the ducts themselves are the source.
- A musty or stale smell when the heat or AC starts. Odor at startup means something is sitting in the ductwork or the air handler, and the blower is pushing it into the house. In West Seattle’s damp months this is often moisture-related, and it’s worth inspecting before it spreads.
- Uneven airflow between rooms. When one bedroom never gets warm and the kitchen is fine, a restricted or disconnected branch is a common cause. Video inspection tells you whether it’s buildup, a crushed section or a joint that’s come apart.
- Allergy or asthma symptoms that flare indoors. If symptoms track with time spent at home and worsen when the system runs, the air pathway is a reasonable place to look. We don’t diagnose medical conditions, but a dirty system doesn’t help anyone breathing the same air.
- Visible debris at the registers or a recent remodel. Drywall dust and construction debris travel through the whole system and settle everywhere. If the house has been under work, or you’ve just bought a home with unknown service history, cleaning gives you a known starting point.
Our Air Duct Cleaning Process – Step by Step
Every job follows the same sequence, and you can watch any part of it.
- 1
Walkthrough and system assessment. We start by looking at the system layout, register count, filter setup and any obvious trouble spots, and we ask what you’ve noticed. This is also when we confirm the flat price for the system and what it covers, so nothing changes once the equipment is out.
- 2
Containment and negative pressure. Before we disturb any dust, we connect HEPA-filtered vacuum equipment to the main trunk and set up containment at the registers. That keeps loosened particulate inside the system rather than in your rooms. On heavier jobs, Abatement Technologies equipment handles the particulate load.
- 3
Mechanical agitation of every branch. A rotary brush head runs through each supply and return branch to break debris off the duct walls, followed by air whips or compressed air in sections the brush can’t reach. This is the step that separates a real clean from a wipe-down, because dust clings to the walls and won’t come off with suction alone.
- 4
Air handler and HVAC component cleaning. We clean the accessible interior of the air handler, the blower and the coil area, since a dirty blower undoes a clean duct in short order. If we find a breached joint or a disconnected run, we note it and quote the repair separately through our air duct cleaning and sealing service.
- 5
Verification, photos and sanitizing. We finish with a visual check, video inspection where it’s useful, and before-and-after photos of your own ducts so you can see the difference. If you want post-clean sanitizing or an air quality upgrade, that’s the moment we discuss it, not before the work is verified.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Air Duct Cleaning Cost in West Seattle?
Air duct cleaning in West Seattle typically runs $350 to $700 for a standard single-family home, and a larger house with an extended system or heavy contamination can land between $600 and $1,200. Commercial work is priced per system after a walkthrough, and adding the dryer vent or a duct sealing repair to a full-system visit usually comes in lower than booking them separately.
| Service | Typical estimated range |
|---|---|
| Residential full-system cleaning | $350 – $700 |
| Larger or heavily contaminated home | $600 – $1,200 |
| Supply or return ducts only | $250 – $450 |
| Dryer vent cleaning added to a visit | $95 – $175 |
| Video inspection | $95 – $200 |
| Post-clean sanitizing | $80 – $250 |
What moves the number is the size of the system, how many branch runs there are, how accessible the ductwork is, and how much buildup we find. The written estimate sets the final price, and it’s one flat price per system rather than a per-vent figure that climbs as the technician counts registers.
Some quotes in the Seattle area come in far lower than these ranges because they’re a teaser for add-ons once the technician is on site. The way to avoid overpaying is to ask two questions up front: is the price flat for the whole system, and will you get photos of your own ductwork before and after. Your free estimate covers the walkthrough, the assessment and a written scope, with no obligation to book.
Air Duct Cleaning Near West Seattle – Our Service Area
We schedule duct cleaning across West Seattle and into the surrounding neighborhoods, including Delridge, White Center, Boulevard Park and Beacon Hill, with work also extending toward Rainier Valley, Columbia City, Rainier Beach, Madison Park, Laurelhurst, Fremont and Wallingford. Positioning on the peninsula and the bridges means arrival windows vary with traffic, so we build that into the appointment rather than promise a time we can’t keep. If you’re in a neighboring area and want to check coverage, look at our air duct cleaning page for that part of the city.
Serving West Seattle, WA – Our Local Coverage Area
We serve West Seattle and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Air Duct Cleaning in West Seattle
Air duct cleaning is the mechanical removal of dust, debris and buildup from the ductwork that carries air through your home, done with negative pressure so the material is captured rather than redistributed. It includes the supply and return branches, the register boots and the accessible parts of the air handler. It’s not a wipe of the visible vent openings, which is what a low-cost surface job amounts to. If you want the full pathway addressed at once, call (877) 492-4032 for an exact quote; estimates are free.
A typical single-family home takes about two to four hours for a full-system clean, depending on how many branches there are and how accessible the ductwork is. Homes with a long return trunk, tight attic routing or heavy buildup run longer. Commercial spaces are scheduled after a walkthrough so we can set containment around your operating hours. Call (877) 492-4032 to talk through your system; estimates are free.
Expect a typical estimated range of $350 to $700 for a standard home, moving to $600 to $1,200 on larger systems or heavier contamination. The written estimate sets the final price and quotes one flat price per system, so a house with more registers doesn’t turn into a per-vent bill. Call (877) 492-4032 for an exact quote; estimates are free.
We clean with Rotobrush rotary brush systems and Nikro HEPA-filtered vacuum equipment, and we’re familiar with how each performs across different duct materials and configurations. That matters because brush grade and vacuum routing have to match the ductwork for the clean to actually work. Whether your system has rigid metal, flex or a mix of both, call (877) 492-4032 and we’ll tell you what your setup needs; estimates are free.
Same-day appointments are often possible when you call early, and we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (877) 492-4032 to check availability for your address.
We stand behind the work and walk you through the result before we leave, with before-and-after photos of your own ducts so you can judge it yourself. The local pro is licensed and insured as their state requires, and the flat price agreed in your written estimate is what you’re billed. Any repair we recommend is quoted separately and in writing before it happens. Call (877) 492-4032 to book an estimate; estimates are free.
Clear access to the furnace and the registers, move breakables off nearby shelves, and let us know about pets so we can plan containment accordingly. There’s no need to shut the system off yourself; we do that as part of setup. Cleaning generates equipment noise and some airflow movement near the registers, so plan for that if anyone in the house works from home. Call (877) 492-4032 with any questions before the visit.
Beyond the ducts themselves, our related work covers dryer vent cleaning for that second pathway and air quality hardware when a clean system needs better filtration.
Schedule Your Air Duct Cleaning Service in West Seattle Today
Book duct cleaning in West Seattle with professional-grade equipment, one flat price per system agreed before work starts, and before-and-after photos of your own ducts. Our technicians have up to 8 years of experience and offer a free, no-obligation estimate. Call (877) 492-4032. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning West Seattle.