Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Air Quality & Sanitizing for West Seattle Homeowners
If your family wakes up congested every morning, if the ductwork smells musty when the furnace kicks on, or if you’ve just bought a West Seattle home with an HVAC system of unknown history, the air moving through your house is the place to start. Cleaning removes the buildup; sanitizing treats what’s left behind on the surfaces you can’t see. Our technicians have up to 8 years of experience and use professional-grade Rotobrush and Nikro equipment, not a shop vac and a hose. We schedule same-day service in West Seattle when the calendar allows. Call (877) 492-4032. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Air Quality & Sanitizing Service Includes
This isn’t a single spray-and-go treatment. It’s a set of targeted steps matched to whatever problem is actually in the system, from intake to output. Every job starts with an inspection so we know whether you’re dealing with mold, bacteria, odor, allergens, or some combination.
Mold Treatment
Mold grows in ductwork when moisture collects on cool surfaces, and West Seattle’s damp, cool stretches give it plenty of opportunity, especially on runs that pass through crawlspaces and garages. You’ll usually notice it as a musty smell that gets stronger when the system runs, or as visible dark spotting near registers and the air handler. We treat the affected sections with an antimicrobial application after cleaning, and we look at the moisture source so the same spot doesn’t recolonize a season later.

Bacteria Sanitizing
Bacteria settle on duct walls, the evaporator coil, and the drain pan, and every time the blower runs it lifts some of that back into the rooms you live in. This matters most in households with infants, elderly residents, or anyone with a compromised immune system. We apply a sanitizing treatment across the full air pathway following extraction, so the surfaces are clean before they’re treated.

Odor Removal
Persistent odors, whether from pets, cooking, smoke, or a previous occupant, often live in the porous lining of the duct system and won’t come out with surface cleaning alone. You’ll recognize it when the smell is strongest at startup and fades the longer the system runs. We clean the source first, then treat with an odor-neutralizing application rather than masking the smell with fragrance.

UV Light Installation
A UV light mounted at the coil or in the return keeps microbial growth from reestablishing on the wet components between cleanings. It’s worth considering if you’ve had repeat mold or odor issues, or if the coil sits in a dark, damp cabinet. We install Honeywell and Aprilaire air quality hardware, and we’ll tell you honestly whether a UV unit fits your system or not.
Air Purifier Install
A whole-home purifier works with your existing ductwork to filter particles the standard furnace filter misses, which is the practical step for allergy sufferers and households near busy corridors. You need one if you’re replacing a string of cheap filters that clog within weeks and never seem to make a difference. We supply and install Aprilaire and Honeywell systems sized to your air handler’s actual airflow.
Allergen Reduction
Pollen, dust mite debris, and pet dander accumulate in return ducts and get redistributed with every cycle. If your allergies track with the seasons or flare when the heat comes on, the duct system is worth a hard look. We combine deep extraction cleaning with sealing of the breaches we find, then recommend filtration that fits the problem, because clean ducts attached to leaky ones undo the work.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Air Quality & Sanitizing
We work with Rotobrush rotary brush extraction systems on every cleaning, and that familiarity matters when the ducts are heavily fouled with packed lint and debris that a plain vacuum can’t lift. We also run Nikro HEPA-filtered vacuums for particulate containment, keeping what comes out of the ducts from ending up in your living room. For elevated contamination scenarios, we bring Abatement Technologies equipment, the kind used when the particulate load calls for more than a standard extraction setup.
On the air quality hardware side, we install and service Honeywell and Aprilaire purifiers and UV units, and we know where those systems wear out, from clogged media cabinets to failed power supplies that leave the unit running but doing nothing. We’re not going to tell you the equipment is the whole answer, because it isn’t. Whether you have Aprilaire, Honeywell, or any other make, we can help you sort out what’s actually failing and what just needs cleaning.
Signs You Need Air Quality & Sanitizing Right Now
- A musty smell that shows up when the heat or AC kicks on. That’s the signature of microbial growth somewhere in the system, usually on the coil or in a damp duct run. It gets worse over time because the growth has a steady food and moisture supply, and treatment is far simpler before it spreads through the whole pathway.
- Congestion or sneezing that eases when you leave the house. When symptoms track with time spent indoors and get worse when the system runs, the ductwork is a reasonable suspect. Deep cleaning plus allergen-focused filtration addresses the source rather than the symptoms.
- Visible dust settling on surfaces within a day of cleaning. That pattern usually points to leaks in the duct system pulling attic or crawlspace air into the supply side. We seal what we find as part of the same visit, so you’re not chasing the problem with a duster.
- A new-to-you home with an HVAC system of unknown history. If you can’t say when the ducts were last cleaned, treat the answer as never. A baseline cleaning and sanitizing gives you a known starting point and reveals any breaches worth repairing before they get worse.
- Recent water intrusion, renovation dust, or a pest problem in the ductwork. Any of these introduce contamination that ordinary filtration won’t remove. Sanitizing after extraction is the step that gets the system back to a clean baseline.
Our Air Quality & Sanitizing Process – Step by Step
- 1
Inspection and source identification. We open access points, camera the duct runs where needed, and check the coil, drain pan, and return plenum for moisture. You get a plain explanation of what we found before any work begins.
- 2
Containment and extraction. We connect HEPA-filtered Nikro equipment and work through the system with the Rotobrush rotary tool, using negative pressure to hold debris in the machine. Registers and vents get sealed off so the dust doesn’t migrate into the rooms.
- 3
Cleaning the full air pathway. Supply and return runs, the air handler, the blower compartment, and the coil all get attention, because sanitizing a dirty surface accomplishes very little. If we find a breach or a disconnected joint, it goes on the repair list with a price.
- 4
Sanitizing application. Once the surfaces are clean and dry, we apply the appropriate antimicrobial or sanitizing treatment across the pathway, matched to what the inspection found. Treated surfaces get time to work before the system goes back into service.
- 5
Hardware and verification. If you opted for a purifier or UV unit, we install it and confirm airflow and operation. We finish by walking the system with you and showing before-and-after photos of your own ducts, so you can see what changed.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Air Quality & Sanitizing Cost in West Seattle?
Most air quality and sanitizing work in West Seattle falls in these ranges, and the written estimate you get after inspection sets the final price. There’s no per-vent pricing and no teaser coupon that grows into a bigger invoice once we’re on site.
| Service | Typical Estimated Range |
|---|---|
| Antimicrobial sanitizing after duct cleaning | $250 – $550 |
| Mold treatment on affected duct sections | $400 – $900 |
| Odor removal treatment | $300 – $650 |
| UV light installation | $350 – $750 |
| Whole-home air purifier installation | $700 – $1,800 |
| Full cleaning, sanitizing, and sealing package | $700 – $1,600 |
What pushes a job toward the higher end is size and condition: a larger home, heavy contamination, multiple stories, or ductwork that’s never been cleaned. What keeps it low is a system that’s been maintained and just needs treatment after a routine cleaning. The way to avoid overpaying is to insist on a flat price per system agreed before work starts, which is how we quote, and to ask for photos of the work. Our free estimate includes an inspection, a source assessment, and a written scope with the price attached, so nothing about the invoice should surprise you.
Air Quality & Sanitizing Near West Seattle – Our Service Area
We connect homeowners across West Seattle and the surrounding neighborhoods with vetted local professionals, including Delridge, White Center, Boulevard Park, Beacon Hill, Rainier Valley, and Columbia City. Same-day scheduling is often possible when you call early, and larger purifier or UV installs are usually booked within a few days. If you’re in Rainier Beach, Madison Park, Laurelhurst, Fremont, or Wallingford, call and we’ll confirm the next opening. Learn more about the full air duct cleaning West Seattle service, or compare our air quality & sanitizing and air quality & sanitizing pages for nearby areas.
Serving West Seattle, WA – Our Local Coverage Area
We serve West Seattle and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Air Quality & Sanitizing in West Seattle
It’s the treatment of the surfaces inside your duct system and HVAC components to reduce mold, bacteria, odors, and allergens after the system has been cleaned. Cleaning removes the buildup; sanitizing treats what remains on the surfaces so growth doesn’t return. It’s not a substitute for cleaning, and in our experience the order matters: extraction first, treatment second. Call (877) 492-4032 to talk through what your system needs.
A typical sanitizing treatment after a cleaning adds about 30 to 60 minutes, while a full cleaning plus sanitizing takes a few hours depending on the size of the home. UV light and purifier installs usually add another hour or so. You don’t need to leave the house for most of the work. We’ll give you a realistic window when we book the appointment.
A typical antimicrobial treatment after cleaning runs $250 – $550, and full cleaning plus sanitizing and sealing lands around $700 – $1,600 depending on home size and duct condition. Purifier and UV installs are quoted separately based on the equipment. The free estimate is where the final price is set, per job, in writing. Call (877) 492-4032 for an exact quote; estimates are free.
Low quotes usually reflect a smaller scope than the price suggests: surface vacuuming instead of deep extraction, no sanitizing step, and no attention to leaks or the coil. The bait-and-switch pattern is a low coupon price that balloons once the technician is on site. We quote one flat price per system before work starts, and we show before-and-after photos of your own ducts so you can see what you paid for. Call (877) 492-4032 to compare honestly.
Yes. We install and service Aprilaire and Honeywell air quality systems, including purifiers and UV units, and we can clean the media cabinets and check operation of existing units. We’re not going to tell you the equipment is the whole answer, because it isn’t. Whether you have Aprilaire or any other make, we can help.
Same-day service is often possible in West Seattle when you call early in the day. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed on Saturday, and a call outside dispatch hours is booked into the next opening. Call (877) 492-4032 and we’ll confirm the next available slot.
Most homes we work in land between $250 and $1,600 depending on scope, and the written estimate holds the final number. As a rule, a full cleaning and sanitizing makes sense every few years, sooner after water intrusion, renovation, or a pest problem. Homes with pets, allergy sufferers, or an elderly resident often benefit from a shorter interval. Call (877) 492-4032 for an exact quote; estimates are free.
Clear access to the furnace, air handler, and attic or crawlspace hatch, and move anything fragile away from the registers. You don’t need to empty closets, but we appreciate a path. Secure pets in a room we won’t be working in. If you have a question about access ahead of time, call (877) 492-4032 and we’ll walk you through it.
Schedule Your Air Quality & Sanitizing Service in West Seattle Today
Cleaner air starts with the right tools and a clear plan. Our technicians have up to 8 years of experience, and we bring professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies to every job, with Aprilaire and Honeywell systems available when you want a long-term fix. Call (877) 492-4032. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and there’s no obligation. We’ll leave you with air quality & sanitizing you can actually verify, photos included.
Written by the team at Air Duct Cleaning West Seattle.