Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
See the difference
Before
After
Before
After
Before
AfterHow Much Does Dryer Vent Cleaning Cost in West Seattle?
Dryer vent cleaning in West Seattle typically costs $125 to $225 for a standard residential vent run, and $250 to $475 when the job is longer, clogged harder, or on the roof. The written estimate you get before any work starts sets the final price. Estimates are free, and we can usually book same-day service.
That range covers the whole job: the technician runs the line, clears the lint, and shows you what came out. What pushes the number up is access, length, and how badly the vent has been ignored – not the address. If your dryer is taking two cycles to dry a load or the laundry room smells like a warm attic, the vent is telling you something, and the cost of clearing it now is far less than what a blocked vent does over time.
Call (877) 492-4032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Standard single-family dryer vent cleaning in West Seattle runs $125 to $225.
- Roof-terminated, long, or heavily compacted vents run $250 to $475.
- Condensing dryers, tight crawlspaces, and rigid metal runs each add to the base price.
- Every job is priced per job by a written estimate before work starts, and the estimate is free.
- We use professional-grade extraction equipment, not a shop vac and a hose.
Dryer Vent Cleaning Cost Breakdown (2026)
Here’s how a West Seattle dryer vent job breaks down by scenario. These are typical ranges for the local market, not quotes – your written estimate is the real number.
| Job Type | Typical Price Range | What It Covers |
|---|---|---|
| Standard single-family vent (short run, ground level) | $125 – $225 | Full line extraction, lint trap area, exterior termination check |
| Long or multi-turn vent run | $200 – $325 | Extended reach with rotary brush equipment through elbows and offsets |
| Roof-terminated vent | $275 – $450 | Roof access, cap removal, full line extraction, cap reinstall |
| Heavily compacted lint or pest debris | $250 – $475 | Multi-pass extraction, obstruction removal, HEPA vacuum containment |
| Condensing dryer vent setup | $175 – $300 | Water-line clearing, moisture check, drainage path inspection |
| Commercial or multi-unit dryer vent | Priced per run after site review | Stacked units, shared runs, rooftop termination |
What moves the price down: an easy run, a short exit through the wall, ground-level access, and a vent that was cleaned within the last couple of years. What moves it up: a vent that’s never been touched, a roof termination, a run that snakes through three elbows, or a laundry closet where the technician is working on hands and knees. None of that is padding – it’s time and equipment, and both are real.
We install and stock air quality hardware from Honeywell and Aprilaire, so if the inspection turns up a vent termination that’s letting lint trap at the exterior cap or a dryer that needs a better exhaust path, the same visit can address it rather than sending you to a second company. That’s the point of full air-pathway coverage: from intake to output, one job.
What Affects Dryer Vent Cleaning Pricing in West Seattle
Five things decide where your job lands on the range. Being honest about all of them before we arrive is how we keep the estimate accurate.
- Vent length and number of turns. A straight 10-foot run is quick. Every elbow, offset, and bend adds drag on the lint and time on the brush, and West Seattle’s older homes often have vents that took a winding path to reach a side wall.
- Where the vent exits. Wall terminations at ground level are the easiest to service. Roof terminations cost more because the technician has to get up there safely, remove the cap, and put it back. Rooftop access on a steep pitch or a wet winter day is a real line item, not a sales pitch.
- How compacted the lint is. Loose lint brushes out fast. A vent that’s been ignored for years packs into a hard felt layer against the pipe wall, and that takes multiple passes with the rotary brush system to break up. That’s where the Nikro HEPA vacuum earns its keep – it holds the particulate instead of blowing it into your laundry room.
- Dryer type. Condensing dryers are common in West Seattle’s newer townhomes and apartment-style builds, and their vent paths collect moisture as well as lint. Clearing a damp line and confirming drainage takes longer than a standard dry-side vent.
- Access to the dryer and termination. A dryer on a pedestal with room to pull it out is quick. A dryer boxed into a closet, a crawlspace termination, or a tight townhome vertical run each add labor.
- Whether the job is part of a larger air-pathway visit. If we’re also cleaning supply and return ducts or sealing a breach we found, the pricing is set together, which is usually better than two separate service calls.
West Seattle’s housing stock is part of the story here. A lot of the older single-family homes on the west side have laundry rooms where the dryer vent travels a good distance before it exits, and the damp stretch of the year from late fall through early spring keeps the laundry room humid. That humidity is a factor in how fast lint mats down and how quickly a lint-clogged vent starts causing the dryer to overheat. Dryer vents here don’t get a summer baking that dries everything out, so the buildup sits wet and dense. That’s why we treat dryer vent cleaning as a maintenance item in West Seattle rather than a once-ever chore – once every year to 18 months is a reasonable cadence for a busy household.
If you want the full picture of how we handle the job itself – the equipment, the passes, and what we check at the termination – see dryer vent cleaning.
How to Save on Dryer Vent Cleaning in West Seattle
The single biggest lever on the price is how often you have it done. A vent cleaned annually sits in the bottom half of the range because the technician is clearing loose lint, not chipping felt off a pipe wall. Let it go three years and you’re paying for the multi-pass job.
- Clean the lint screen every load. It sounds trivial, but a clogged screen forces more lint into the vent line and speeds up the next buildup. It costs nothing and it directly delays your next paid cleaning.
- Check the exterior termination yourself between cleanings. Look at the outside cap once a month and clear any visible lint or nesting material. If the flapper sticks open or the birds have moved in, call before it becomes a removal job.
- Pull the dryer out and vacuum behind it. Lint collects in the space behind and under the dryer, and that pocket is part of what a technician clears. Keeping it lighter shortens the job.
- Book before the vent clogs hard. A warning that it’s time: the dryer takes longer than one cycle to dry a load, the top of the dryer gets hot, or you smell a faint warm lint odor. Cleaning at the first signal keeps the job in the standard range.
- Combine services on one visit. If you’ve been meaning to address ductwork or HVAC cleaning too, bundling the work into one visit is more efficient than two separate calls. Our team handles air duct cleaning West Seattle services alongside dryer vent work under one roof.
- Take the free estimate seriously. Call (877) 492-4032 and describe the vent setup – length, exit point, dryer type. We’ll give you the range before anyone comes out, so you can plan around it.
One caution: when a vent is badly clogged, don’t reach for a home kit or a rental vacuum. Dryer vents carry heat, and a fire needs only lint and a hot dryer running long past a blocked line. A technician is the safer route. The same goes for anything you’d have to climb onto a roof to reach – that’s work for someone with the right equipment and a safe footing.
Why Dryer Vent Cleaning Costs What It Does
There’s a reason the price sits where it does, and it comes down to what’s inside the job. Dryer vent cleaning done properly is physical work with real equipment. The technician disconnects the dryer, runs the rotary brush through the entire line from the dryer connection to the outside termination, extracts the lint with a HEPA-filtered vacuum so it doesn’t end up in your air, then reconnects and confirms airflow. The line has to be clear wall to wall, not just at the trap end.
That’s the difference between a good dryer vent job and a cheap one. A shop vac and a wand gets the first few feet. Our technicians use the Rotobrush rotary brush extraction system on every job, which reaches into the full run and scrubs the pipe wall where lint actually sticks. The Nikro vacuum pair contains what comes out. And when the vent shows elevated contamination – pest evidence, or lint that’s compacted to the point of acting like a wall – we bring in Abatement Technologies equipment, which is built for particulate control beyond a surface wipe.
This is also why we offer duct repair and sealing in-house. If the technician finds a breach in the vent line – a disconnected joint, a crushed section behind a wall cavity, or a termination that’s been bug-screened into a permanent clog – we can plan the repair with you rather than hand you off to someone else. That’s the “we seal what we find” part of the job. Duct repair and sealing as a named service exists for exactly this reason. A company that only cleans and doesn’t seal will leave the next problem sitting there.
Our technicians have up to 8 years of experience, and that experience is why the estimate tends to hold. A vent that looks standard from the laundry room can turn into a long, elbow-filled run once the technician is inside the wall, and an experienced eye catches that before the work starts. The written estimate sets the price. If we find something unexpected mid-job, we stop and tell you before the total changes.
What you’re paying for is a result you can check. After a proper cleaning, the dryer dries a normal load in one cycle, the exterior flapper moves freely, and there’s no lint smell in the laundry room. If you’re unsure whether it’s the vent or the dryer itself, our team can tell you on site during the same visit.
When Do You Actually Need Dryer Vent Cleaning?
In West Seattle, plan on once every 12 to 18 months for a normal household. Larger families, households that do laundry heavily, and homes with long or winding vent runs should lean toward the annual mark. A dryer vent that’s never been cleaned on an older home should be checked regardless of how long it’s been.
The signals that it’s time:
- Clothes take longer than one cycle to dry, especially heavy items like towels and jeans.
- The dryer or the wall behind it feels hot to the touch during a cycle.
- There’s a burnt or warm-lint smell in the laundry area.
- The exterior flapper doesn’t move freely, or lint is visible around the exterior cap.
- The lint screen fills faster than it used to.
If more than one of those is true, book a cleaning. If the dryer won’t heat at all, that’s a dryer problem rather than a vent problem, and the technician will tell you plainly. We’d rather send you to an appliance repair than charge for a cleaning that won’t fix it.
Homeowners inheriting a house with an unknown dryer vent history – which is common with West Seattle’s older housing – should get the vent checked as part of move-in. It’s a cheap way to start clean, quite literally, and it catches problems early. The same applies if you’ve just had ducts cleaned elsewhere: make sure the dryer vent was included. Plenty of “duct cleaning” jobs don’t touch the dryer line. Our scope is the full air pathway, so a single visit can cover dryer vent, supply and return ducts, and the HVAC unit in one trip.
Our technicians carry the equipment for elevated contamination because they need to respond when they open a vent and find something worse than expected. That capability is part of the price you pay for a thorough job, not a separate upsell. One crew handles every step, from the dryer connection out to the exterior termination. If that leads to ductwork work, the same crew can scope it under our broader West Seattle air duct services.
FAQs – Dryer Vent Cleaning Cost
How much does dryer vent cleaning cost in West Seattle?
Most West Seattle dryer vent cleanings cost between $125 and $225 for a standard home, with roof-terminated or heavily clogged vents running $250 to $475. Your written estimate sets the final price. Call (877) 492-4032 for a free quote – estimates are free.
Is it cheaper to clean or replace a dryer vent?
Cleaning is almost always cheaper than replacement. Cleaning falls in the $125 to $475 range depending on access; replacing a vent run that’s crushed or badly routed is a larger construction job, and it’s the right call only when the line can’t be cleaned or doesn’t meet code. We’ll tell you which situation you’re in once we see the vent. Call (877) 492-4032 and we’ll walk through it with you.
Can you clean my dryer vent the same day?
Yes. Same-day service is usually available in West Seattle, and the price doesn’t change for it. Call (877) 492-4032. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why does my roof-vent dryer cost more to clean?
Because the technician has to reach the roof safely, remove the termination cap, run the full line from up there, and reinstall the cap – which typically adds $150 to $300 to the base price. It’s time and access, not a surcharge. Call (877) 492-4032 for an estimate based on your vent’s exit point.
Do you clean commercial or multi-unit dryer vents?
Yes. We price commercial and multi-unit dryer vents per run after a site review, because stacked units and shared runs each need their own inspection. Call (877) 492-4032 to set up the review – estimates are free.
What equipment do you use for dryer vent cleaning?
We use the Rotobrush rotary brush extraction system and Nikro HEPA-filtered vacuums on every job, with Abatement Technologies equipment on hand for elevated contamination. That’s the professional-grade end of the equipment spectrum, not a shop vac and a hose. If air quality hardware from Honeywell or Aprilaire makes sense after the cleaning, we install it as part of the same visit.
One last note on pricing. Every job in West Seattle is priced by the written estimate the technician prepares on site – not by a phone call guess, and not by a coupon. The ranges on this page are the market context; the estimate is the agreement. If anything about the vent setup changes the number, you hear it from us before the work starts, and you decide.
Call (877) 492-4032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Whether it’s a quick standard cleaning or a roof-terminated vent you’ve been putting off, the first step is a call, and the estimate costs you nothing.
Written by the team at Air Duct Cleaning West Seattle.
Pricing reflects the West Seattle market as of 2026. Air Duct Cleaning West Seattle offers free estimates – call (877) 492-4032.
What Our Customers Say
"Found a disconnected run in the crawlspace while they were in there and told me about it rather than cleaning around it."
- Maria Reyes"Job was done well and the house smells better. There was some dust knocked loose around a couple of the registers that I had to wipe down afterward."
- Paige Lawson"My wife's allergies had been bad in this house since we moved in. It's been two months since they did the ducts and it's noticeably better. Not a miracle, but real."
- Kevin Parker