Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable HVAC Cleaning Across Beacon Hill
Beacon Hill is a hill of two housing markets, and we work both of them. On one block you’ll find a freshly handed-over new build with drywall dust still settling in its supply runs, and next door a 1940s bungalow with galvanized steel ductwork that has never been cleaned. Our HVAC cleaning team handles each on its own terms, from the air handler and evaporator coil to the branch runs and boots. If you’re in Beacon Hill and your registers are blowing grit, call (877) 492-4032 for a free estimate.
Why Beacon Hill Homeowners Call Air Duct Cleaning West Seattle
We bring professional-tier extraction equipment to Beacon Hill jobs, not a shop vac and a hose. Rotobrush rotary brush systems and Nikro HEPA-filtered vacuums are what we use on every visit, because construction dust and decades of settled debris respond to real containment, not surface wiping. Homeowners on the hill who’ve already had one low-bid cleaning call us because the dust came back within weeks.
That happens when someone wipes the registers but skips the branch runs. Drywall dust and joint compound sit deep in the supply and return ducts, and no amount of register cleaning reaches them. We do source removal under negative pressure and can install Aprilaire or Honeywell air quality hardware afterward if the filtration needs upgrading. Our technicians have up to 8 years of experience, and familiarity with Beacon Hill’s tight crawl spaces and long duct runs saves time on access alone. That matters here, where a mid-century ranch may have a branch run that disappears under a remodel and reappears at the far end of the house.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our HVAC Cleaning Services in Beacon Hill
Air Handler Cleaning in Beacon Hill
The air handler is where construction dust settles first in a new Beacon Hill home. During rough-in, the cabinet sits open while drywall gets cut and sanded, and the blower wheel pulls that fine dust straight in. We clean the cabinet, the wheel and the housing so the system starts its life with a clean air path rather than a coated one.

Evaporator Coil Cleaning in Beacon Hill
A coil caked with joint compound and sawdust can’t transfer heat the way it should, and in a Beacon Hill new build that coating is often there before the first heating season. We clean the coil fins and check the drain pan, then confirm the coil is actually shedding condensation instead of holding it. Where the coil needs treatment after cleaning, we apply it.

Blower Cleaning in Beacon Hill
Blower wheels collect dust on their fins, and an unbalanced wheel runs louder and moves less air. In the 1920s-to-1950s bungalows around Beacon Hill, the original ductwork was sized for gravity furnaces and later fitted with forced-air units, so pressure imbalances push extra debris into the blower housing. Cleaning the wheel restores airflow and quiets the system.

Condenser Cleaning in Beacon Hill
Late-summer pollen from Beacon Hill’s surrounding greenery gets pulled through the condenser and packs into the fins. A clogged condenser runs hot and works harder than it needs to. We clean the coil and check the surrounding clearance so the unit can reject heat properly going into cooling season.
Trusted Brands We Service in Beacon Hill
We work on equipment from the brands most Beacon Hill homes already run, and we install air quality hardware from Honeywell and Aprilaire when the filtration needs a step up. Our Rotobrush and Abatement Technologies equipment covers both the routine cleaning and the heavier contamination cases, and Guardsman products handle the finishing work. We don’t claim to stock parts on a truck; if a component needs replacing, we tell you what it is and price it on the written estimate so there are no surprises after the fact.
See the difference
Before
After
Before
After
Before
AfterCommon HVAC Cleaning Problems We See in Beacon Hill Homes
- New build handover cleaning gets skipped. The house looks spotless on moving day, so nobody thinks about the ducts. Drywall dust and joint compound have already settled into the supply and return runs and the air handler behind the registers.
- Registers get wiped while the branch runs stay packed. A homeowner cleans the vent covers at move-in and the dust keeps blowing back within weeks. The source is further down the line, where construction debris never got removed.
- Flex duct from a remodel sags and goes unsealed. Post-war ranches around Beacon Hill often got flex duct added in a later remodel, and when it sags or the joints are loose, branch runs feed debris and pollen straight to the boots.
- Original galvanized ducts trap debris at the branch ends. Bungalow-era ductwork collects decades of pollen and dust in the runs no one ever cleaned, and the pressure imbalance from a modern forced-air unit keeps pushing it toward the living space.
Pricing for HVAC Cleaning in Beacon Hill, WA
A whole-system HVAC cleaning in Beacon Hill typically runs $450 to $900, depending on the number of branch runs, how accessible the crawl space is, and whether the air handler and coil need separate attention. Air handler cleaning on its own usually lands between $200 and $400, and evaporator coil cleaning runs $250 to $500 where the coil is accessible without pulling the plenum apart. Blower cleaning adds $150 to $300 to a full-system job. Duct repair and sealing, which we handle in-house so you don’t need a second contractor, is quoted separately once we see the breaches. The written estimate sets the final price, one flat price per system, and the estimate itself is free.
We Also Serve Cities Near Beacon Hill
Beacon Hill sits close to a lot of the city we already work in, and we serve Beacon Hill and its neighbors the same way. That includes Rainier Valley, Columbia City, Rainier Beach and Delridge. If you’re just over the ridge from Beacon Hill, the equipment and process are identical, and the dispatch window is the same. Call and we’ll confirm what your address needs.
Serving Beacon Hill, WA – Our Local Coverage Area
We serve Beacon Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HVAC Cleaning in Beacon Hill
Because the ducts were dirty on day one, before anyone moved in. Drywall dust, joint compound and sawdust settle into the supply and return runs and the air handler during construction, and on the first heating season you notice grit on the registers. That’s a handover problem, not wear and tear. Call (877) 492-4032 for an exact quote; estimates are free.
Sealing the duct openings at rough-in and keeping them capped until handover. Most builders leave the runs open while drywall gets cut, so dust travels through the whole system and coats the blower and coil along the way. A handover clean before move-in is the practical fix. Call (877) 492-4032 to schedule one.
It’s almost always the ducts. Grit on the register face means debris is still sitting in the branch runs behind it, and wiping the covers just moves it around. Source removal under negative pressure pulls it out rather than pushing it back into the room. Call (877) 492-4032 for a look at your system.
Yes, they add access time but not different equipment. Long branch runs and tight crawl spaces mean we work in shorter sections and confirm each one with a camera before moving on. The hill’s damp winters also mean we check boots and joints for moisture-driven mildew while we’re in there. Call (877) 492-4032 to book.
Because the work happens under negative pressure with HEPA filtration, so debris gets captured rather than agitated into the air. We run a camera through the runs before and after, and we confirm airflow and static pressure once everything is buttoned back up. Ask to see the before-and-after footage of your own ducts. Call (877) 492-4032 for a free estimate.
If your Beacon Hill home just changed hands, or the registers are blowing grit you can’t explain, the answer is usually in the ducts and the air handler. Call (877) 492-4032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning West Seattle.