Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Queen Anne
Air leaking from a failed duct joint in Queen Anne doesn’t just waste heat. On this hill, it pulls in exactly what you don’t want: pollen, street dust, and damp air pushed in by the wind off Elliott Bay. We repair and seal duct systems in Queen Anne homes, from original galvanized runs in early-1900s craftsman houses to compact forced-air systems in the apartment corridors along Queen Anne Ave and Nickerson St. Our technicians have up to 8 years of experience, and we know how these houses are built. Call (877) 492-4032. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Queen Anne Homeowners Call Air Duct Cleaning West Seattle for Duct Repair & Sealing
Duct work in Queen Anne is rarely a copy-paste job. The hill’s older houses have short, irregular duct runs tucked into retrofitted spaces, and whole stretches of the neighborhood share walls, stacks, and mechanical systems between units. We show up expecting that complexity instead of being surprised by it.
The people who call us here are usually skeptical of the low-bid duct cleaner who arrives with a shop vac and a coupon. Fair. We work with contractor-grade extraction systems (Rotobrush rotary brush equipment and Nikro HEPA-filtered vacuums), and Duct Repair & Sealing is a named service we perform ourselves, not something we hand off. You’ll see before-and-after photos of your own ducts, and the price is one flat figure per system, agreed in writing before we start.
Response time to Queen Anne is quick. We cover the whole hill, from the top of the counterbalance down toward Nickerson St, and we schedule around building access and parking constraints rather than pretending they don’t exist. Local knowledge matters most when a job turns unusual. We seal what we find.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Queen Anne
Duct Sealing
Unsealed joints in original galvanized ducts let air escape and let outdoor air in. On a windy hilltop that means pollen and street dust get drawn into the system every time the furnace or AC runs. We seal supply and return runs under negative pressure with HEPA filtration, so the dust we disturb is captured rather than scattered through your rooms.

Flex Duct Repair
In retrofitted spaces and compact apartment systems around Queen Anne, flex duct often gets crushed in tight chases or pulled loose at the connection. Both cause air leaks and weak airflow at the far registers. We replace damaged sections and reconnect them properly instead of taping over a problem that will reopen.

Metal Duct Repair
Older sheet-metal runs develop separated seams, popped joints, and corrosion at contact points. We repair and reseal those sections so the duct path actually holds pressure. Much of the housing stock here dates from 1900 to 1930, so this is common ground on almost every metal-duct call in Queen Anne.

Duct Insulation
Damp, cool winters are the local reality, and poorly insulated ducts in crawlspaces or basements can sweat and lose heat before air ever reaches a room. We add insulation where it’s missing and repair what’s been chewed, torn, or flattened. Properly insulated runs also cut down on the condensation that feeds musty smells.
Trusted Brands We Service in Queen Anne
We use professional-tier equipment because the job demands it. Rotobrush handles rotary brush extraction through the full duct pathway. Nikro HEPA vacuums contain particulates during the work. Abatement Technologies equipment comes out for elevated contamination scenarios where standard extraction isn’t enough. When a customer wants to improve air quality beyond cleaning, we install hardware from Honeywell and Aprilaire rather than leaving them to find a second contractor. We don’t claim to stock parts in Queen Anne, but we keep the process moving and turn repairs around quickly. Cleaner air starts with the right tools, and we bring them.
See the difference
Before
After
Before
After
Before
AfterCommon Duct Repair & Sealing Problems We See in Queen Anne Homes
- Unsealed joints in original galvanized ducts. These draw in pollen and street dust thanks to Queen Anne’s windy hilltop exposure, and they waste conditioned air all winter. Most have never been sealed since the house was built.
- Crushed or disconnected flex duct in retrofitted spaces. Compact apartment systems often run flex through tight chases where it gets pinched. That causes air leaks and noticeably reduced airflow at the rooms that need it most.
- Shared dryer vent stacks in multi-unit buildings. Lint builds up beyond the trap in these shared vertical runs, and it’s a fire hazard that rarely gets inspected. This is one of the most overlooked problems in Queen Anne’s denser housing.
- Duct paths routed around old streetcar infrastructure. Some older homes near the counterbalance route still have basement ductwork bent around abandoned cable conduits. Those unusual paths need camera inspection before anyone applies sealant or insulation.
Some Queen Anne homes near the old counterbalance streetcar route still have basement ductwork routed around abandoned cable infrastructure. Duct sealing and repair there often require camera inspection to trace the actual path before applying mastic sealant or insulation, because the runs don’t follow the pattern a technician expects. It’s a local quirk you won’t find in most neighborhoods, and it’s exactly the kind of thing a generic duct company misses.
Here’s how a typical job in Queen Anne usually goes. Original galvanized ducts from the early 1900s have often never been sealed, so air leaks pull in pollen and street dust from the breezes off Elliott Bay. A qualified technician performs a camera inspection to locate disconnected joints and crushed flex sections, then applies mastic sealant to supply and return ducts under negative pressure with HEPA filtration for true source removal. In apartments and condos, shared duct systems and dryer vents routed through vertical stacks need coordination with building management and careful scheduling so multiple units aren’t disrupted at once.
Pricing for Duct Repair & Sealing in Queen Anne, WA
Honest whole-system ranges for Queen Anne’s market, with the written estimate setting the final price. A typical duct sealing job in Queen Anne runs $450 – $900 depending on the number of accessible leaks and how much of the run is reachable. Flex duct repair generally runs $200 – $500 per affected section. Metal duct repair, especially where seams have separated in older sheet-metal runs, typically falls in the $300 – $650 range. Duct insulation for exposed runs usually runs $350 – $750 depending on length and accessibility. Mastic sealant work at joints and connections is included in the sealing figure rather than billed per point. Condo and apartment buildings with shared systems may add coordination time, which we quote up front. Access, unusual routing, and the number of registers all affect the total. The estimate is free.
We Also Serve Cities Near Queen Anne
Our duct repair & sealing team works across the surrounding neighborhoods, including Magnolia, Capitol Hill, Fremont, and Wallingford. If you’re just outside Queen Anne, reach out and we’ll confirm coverage. You can also read more about our work throughout Queen Anne and how we handle older homes and shared building systems.
Serving Queen Anne, WA – Our Local Coverage Area
We serve Queen Anne and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Queen Anne
Many Queen Anne homes date from 1900 to 1930, and their original galvanized or early sheet-metal ducts have often never been sealed. That means more leak points, shorter irregular runs tucked into retrofitted spaces, and occasionally unusual routing that requires camera inspection first. We plan for that complexity rather than discovering it mid-job. Call (877) 492-4032 for a free estimate.
Yes. We repair and seal shared duct systems in Queen Anne condos and apartments, coordinating with building management and scheduling carefully so other units aren’t disrupted. Shared vertical dryer vent stacks get particular attention because lint accumulates beyond the trap. Call (877) 492-4032 to talk through your building’s setup.
Uneven airflow between rooms, dusty registers, higher heating bills than the house should need, and musty smells when the system runs are all common signs. On a windy hilltop, leaks also pull in pollen and street dust, which allergy sufferers notice quickly. A camera inspection confirms it. Call (877) 492-4032 and we’ll schedule an estimate.
With camera inspection first. Some Queen Anne homes near the old counterbalance streetcar route still have basement ductwork bent around abandoned cable conduits, so the actual path has to be traced before mastic sealant or insulation goes on. Guessing leads to missed leaks or damaged runs. Call (877) 492-4032 for an assessment.
It can be. Dryer vent cleaning is a separate service, but for Queen Anne apartments with shared vent stacks we often combine it with duct repair scheduling so the building isn’t disrupted twice. Lint beyond the trap is a real fire hazard. Call (877) 492-4032 to arrange both.
If your ducts are leaking, crushed, or routed through a building system that needs a closer look, call (877) 492-4032 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One flat price per system, agreed before work starts, with before-and-after photos of your own ducts.
Written by the team at Air Duct Cleaning West Seattle.