Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Dryer Vent Cleaning Across West Seattle
If your dryer has started taking two cycles to dry a load, the problem is usually a clogged vent, not a dying appliance. Dryer vent cleaning in West Seattle typically runs $150-$325 for a standard single-family home, with inspections from $95-$150 when you just need the run mapped and tested. We work across West Seattle and know how the housing here changes the job: shared chases in the Alaska Junction condos, older galvanized runs in the cottages up around Genesee Hill, and vent caps that fill with cedar duff every spring. Call (877) 492-4032. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why West Seattle Homeowners Call Air Duct Cleaning West Seattle for Dryer Vent Cleaning
Dryer vents here fail in ways that surprise people who moved from newer suburbs. West Seattle’s dense, mature tree canopy and marine air drive cedar and alder pollen into return ducts each spring, leaving a fine green-yellow film in filter slots, and the same debris settles into exterior vent hoods and bird guards. That film is heavier than in the sunnier parts of the region, and it’s the reason short straight-run assumptions go wrong so often. In many West Seattle homes, dryer vents run through interior walls or shared chases, so lint accumulates in long, angled runs where the flexible duct sags or connects with old galvanized pipe.
A technician typically uses a camera inspection to map the lint pathway, then uses negative pressure and agitation tools to achieve source removal, finishing with a check of the exterior vent cap and bird guard. Because compact lots and shared walls limit equipment access, the job often requires careful setup to avoid disrupting neighbors and to meet NADCA standards for containment.
Our technicians have up to 8 years of experience, and we run professional-grade equipment, not a shop vac and a hose. We use Rotobrush rotary brush extraction and Abatement Technologies vacuum gear for particulate control, so what comes out of your vent gets captured, not blown into the laundry room. When we find a crushed cap, a sagging flex run, or a breached connection, we repair it in the same visit: we seal what we find.
One flat price per system, agreed before work starts. We take before-and-after photos of your own vent run so you can see what was removed. That’s the standard we hold on every West Seattle job, and it’s how we earn the next-door referral.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Dryer Vent Cleaning Services in West Seattle
Dryer vent work isn’t one task. It’s inspection, cleaning, and the hardware at the end of the run. Here’s how each piece works across West Seattle.
Dryer Vent Inspection
An inspection maps the actual path your vent takes, not the path the builder drew. In West Seattle’s dense housing, a vent may run up an interior wall, share a chase with a neighboring unit, or take two 90-degree turns before it exits. We run a camera through the run and measure airflow, then show you the footage.

Vent Cleaning
Cleaning means source removal, not a blast of air. We use rotary agitation and negative pressure to pull lint off the duct walls from end to end. On older homes with galvanized ductwork and many joints, that’s slower work than a straight flex run in a newer infill townhome, and we price it accordingly.

Lint Removal
Lint compacts against the duct wall over time, especially in the long, angled runs common in West Seattle’s 1920s-40s cottages. A partially blocked vent forces the dryer to run hotter and longer, which stresses the appliance and raises drying times. We clear the full run, then check that airflow at the exterior hood matches what the dryer is pushing.

Vent Rerouting
Some West Seattle vents were never well designed. A run that’s too long, sagging flex in a crawlspace, or a route that exits under a deck will clog again no matter how well it’s cleaned. When we find that, we can reroute the run to a shorter, straighter path. If rerouting isn’t practical, we tell you that plainly and explain why.
Bird guard installation and vent cap replacement round out the work, and they matter more here than in most places. The tree canopy fills hoods with debris, so a sound cap and a proper bird guard keep the run protected between cleanings. We install dryer vent cleaning hardware as part of the service, so you don’t need to track down a second contractor.
Trusted Brands We Service in West Seattle
We clean and service the equipment behind the laundry room, not just the vent. That means working with professional-tier brands including Rotobrush extraction systems, Abatement Technologies vacuum equipment, and the air quality hardware from Honeywell and Aprilaire we install alongside cleaning. When a job calls for it, Guardsman products handle the sanitizing step. We don’t claim to stock parts on a truck: what we do is confirm the equipment your vent needs and get it handled in one visit. Cleaner air starts with the right tools, and that applies to the equipment we service as much as the equipment we bring.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in West Seattle Homes
- Assumed straight runs through shared chases. When a dryer backs up to an interior wall or a shared chase, a short straight-run clean leaves the angles full of lint. We map the run first and clean to source. Otherwise the clog returns within weeks.
- Blocked or crushed exterior caps and bird guards. Cedar and alder debris from the canopy packs into vent hoods, and a crushed cap stops the air path entirely. That causes backdrafts and moisture in the run, which is a slow path to a bigger problem.
- One-size-fits-all blasting on older galvanized systems. Early-1900s bungalows and post-war ramblers mix old galvanized trunks with later flex runs. A high-pressure blast without negative pressure and HEPA filtration just moves debris into the house. We agitate and contain.
- Closed-window living in a wet climate. Cool, wet winters and dry summers mean windows stay shut much of the year, so dust and moisture-related debris collect in the vent without the seasonal flushing that open-window homes get.
Pricing for Dryer Vent Cleaning in West Seattle, WA
Honest ranges for the West Seattle market, estimated for a typical job:
- Dryer vent inspection: $95-$150 for a camera inspection and airflow test on the run
- Standard dryer vent cleaning, single-family home: $150-$325, depending on run length and access
- Long or angled run through an interior wall or shared chase: $225-$400
- Vent cap replacement or bird guard installation: $75-$175, depending on hardware and roof or wall access
What moves the number is run length, the number of turns, and access. A straight run out through a wall is the low end. A long interior run with two 90-degree turns in a 1920s cottage is the high end. The written estimate sets the final price, and we agree to it before work starts. No per-foot surprises, no bait-and-switch.
We Also Serve Cities Near West Seattle
We serve West Seattle and work in neighboring communities including Delridge, Beacon Hill, White Center, and Rainier Valley. The housing stock changes block by block in this part of the region, and so does the vent work. If you’re not sure whether we reach your block, call and we’ll tell you.
Serving West Seattle, WA – Our Local Coverage Area
We serve West Seattle and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in West Seattle
It clogs exterior hoods and bird guards faster than in less-wooded areas. Cedar and alder pollen from the surrounding hills settles into vent caps each spring, and the fine film those trees produce is one of the main reasons West Seattle vent caps need checking more often than you’d expect. Call (877) 492-4032 for an exact quote.
Older galvanized systems have more joints and turns, and lint packs into those joints rather than passing through. West Seattle’s 1920s-40s cottages and early-1900s bungalows often run galvanized trunk line that was later connected to flex duct, which sags in the middle. That sag is a lint trap. Call (877) 492-4032 for an exact quote.
Yes, with a camera inspection to find where the shared run diverges and where it exits. Shared chases in Alaska Junction condos and multi-unit buildings are common, and cleaning them requires coordination with neighbors and careful setup to keep containment intact. Call (877) 492-4032 for an exact quote.
Longer dry times, a hot dryer top, a musty smell in the laundry room, or visible lint around the vent hood. If your dryer is taking two cycles to dry a load, the vent is the first thing to check, not the appliance. Call (877) 492-4032 for an exact quote.
We plan the setup around your access before we arrive. Compact lots and shared walls limit where equipment can sit, so we confirm parking and hose routing ahead of the visit and keep the footprint small. Call (877) 492-4032 for an exact quote.
Call (877) 492-4032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. One flat price per system, agreed before work starts, with before-and-after photos of your own vent run so you can see exactly what came out.
Written by the team at Air Duct Cleaning West Seattle.